Home
  Contact Us
  Login
  Checkout

  Welcome visitor.

  

SHELIX f. Shapers & Moulders, Bore: 1 1/4'', Width: 6'', Diameter: 4 3/8''

SHELIX f. Shapers & Moulders, Bore: 1 1/4'', Width: 6'', Diameter: 4 3/8''
  • SHELIX f. Shapers & Moulders, Bore: 1 1/4'', Width: 6'', Diameter: 4 3/8''
  • Brand: Byrd Tool
  • Product Code: MYWOCU-00966
  • (USD) $426.00

  • Price in Canadian Dollar: (CAD) $525.50


  • 3 or more (USD) $424.00
  • 5 or more (USD) $422.00


This SHELIX head can be used on Shapers and Moulders with a matching spindle diameter. You can use it to turn your shaper into a "SHELIX equipped Jointer" or for cutting templates by using a rub collar bearing. These rub collar bearings can be ordered along with this SHELIX head.
Note: The end knives on this SHELIX head exceed the body of the head in length by approx. 0.1". When using a rub-collar bearing, a shim in between cutter head and bearing must be used to ensure proper operation of the rub collar bearing.

How much for shipping? - Please click the button above that reads "Customize and Order". Select any optional items and then click "Add to Cart". A window will pop up that shows the content of your shopping cart. In that window, please scroll down until you find on the bottom a link that reads "Calculate Shipping Costs" Select your country and state (or province) and click "Get Quotes" to see the shipping cost options for your purchase prior to check-out.

Any questions?  - Please refer to our section "FAQ" where most common questions are being answered. If you have any further questions or concerns, please click the button above that reads "Ask a question about this product" to contact us.

Write a review

Note: HTML is not translated!
    Bad           Good

Tags: SHELIX f. Shapers & Moulders, Bore: 1 1/4'', Width: 6'', Diameter: 4 3/8''