Contact Us

  Welcome visitor.


SHELIX for CRAFTEX 6'' Jointer, B706

SHELIX for CRAFTEX 6'' Jointer, B706
  • Brand: Byrd Tool
  • Product Code: MYWOCU-00301
  • (USD) $309.00

  • Price in Canadian Dollar: (CAD) $381.00

This SHELIX head features 5 wings of knives with a total of 30 knives. Additional replacement knives can be ordered along.
New bearings are available for an additional cost. Please click above on "Customize and Order" to see prices for bearings and replacement knives.
If you experience any difficulties with the use of this website or feel uncomfortable ordering online, please call us toll-free at 1-855-699-6635 to place your order over the phone!

Please note: The manufacturer of your machine has changed the cutter head over the years. Older models use a 2 5/8” cutting circle and newer models use a 63mm cutting circle (Cutting circle = diameter of cutter head including knives). Different models were changed at different times but we can say for sure that all models prior to 1996 use the G-6 Imperial versions while all models younger than 2004 use the G6/63 Metric version. If your machine was made between 1996 and 2004, you must determine the cutting circle your cutter head uses. Please do the following:
Wrap a piece of paper around the cutter head so that it is just touching the knives. It is easiest to attach the paper with some tape to the head and rotate the head by hand until fully wrapped (MAKE SURE MACHINE HAS BEEN DISCONNECTED FROM ELECTRICAL POWER SOURCE!). Remove the tape and keep the paper around the head as true a circle as possible. Mark and measure the cutting circumference.
A measurement of 8’’ to 8 1/4’’: Cutting circle = 2.625’’ – Use G-6 head
A measurement of 7 7/8’’ or less: Cutting circle = 2.480’’ (63mm) – Use G-6/63 head

How much for shipping? - Please click the button above that reads "Customize and Order". Select any optional items and then click "Add to Cart". A window will pop up that shows the content of your shopping cart. In that window, please scroll down until you find on the bottom a link that reads "Calculate Shipping Costs" Select your country and state (or province) and click "Get Quotes" to see the shipping cost options for your purchase prior to check-out.

Any questions?  - Please refer to our section "FAQ" where most common questions are being answered. If you have any further questions or concerns, please click the button above that reads "Ask a question about this product" to contact us.

Write a review

Note: HTML is not translated!
    Bad           Good

Tags: SHELIX for CRAFTEX 6 inch Jointer