Contact Us

  Welcome visitor.


SHELIX for JET 8'' Jointer, JJ-8

SHELIX for JET 8'' Jointer, JJ-8
  • SHELIX for JET 8'' Jointer, JJ-8
  • Brand: Byrd Tool
  • Product Code: MYWOCU-00441
  • (USD) $420.00

  • Price in Canadian Dollar: (CAD) $507.00

This SHELIX head features 5 wings of knives with a total of 40 knives. Additional replacement knives can be ordered along.
New bearings are available for an additional cost. Please click above on "Customize and Order" to see prices for bearings and replacement knives.
If you experience any difficulties with the use of this website or feel uncomfortable ordering online, please call us toll-free at 1-855-699-6635 to place your order over the phone!

Please note: There are two different cutter heads available for your machine since the machine manufacturer has changed the cutter head over the years. Some models use an imperial sized shaft and others use a metric sized shaft. Different models were changed at different times but we can say for sure that all models prior to 1996 use the G-8 Imperial versions while all models younger than 2004 use the G-8M Metric version. If your machine was made between 1996 and 2004, You will need to verify which cutter head you need. To do this, you will most likely need to remove the Pulley from the cutter head in your machine and you will need an accurate caliper for measurements. You need to measure the diameter on the end of the shaft on the pulley side.
With a measurement of 19mm (0.7480") - Use G-8 M head
With a measurement of 3/4" (0.750") - Use a G8 Head

Since 19mm translates to 0.7480", the difference is only 0.002" between these 2 versions so accuracy is important
The keyway width is also slightly different:
On the metric version (G8-M), the width of the keyway is 5mm (0.197")
On the G8, the width is between 0.1875" and 0.1895".

How much for shipping? - Please click the button above that reads "Customize and Order". Select any optional items and then click "Add to Cart". A window will pop up that shows the content of your shopping cart. In that window, please scroll down until you find on the bottom a link that reads "Calculate Shipping Costs" Select your country and state (or province) and click "Get Quotes" to see the shipping cost options for your purchase prior to check-out.

Any questions?  - Please refer to our section "FAQ" where most common questions are being answered. If you have any further questions or concerns, please click the button above that reads "Ask a question about this product" to contact us.

Write a review

Note: HTML is not translated!
    Bad           Good

Tags: SHELIX for JET 8 inch Jointer