Home
  Contact Us
  Login
  Checkout

  Welcome visitor.

  

SHELIX for POWERMATIC 8'' Jointer, Model P60 (Incl. 60B, 60C etc.)

SHELIX for POWERMATIC 8'' Jointer, Model P60 (Incl. 60B, 60C etc.)
  • SHELIX for POWERMATIC 8'' Jointer, Model P60 (Incl. 60B, 60C etc.)
  • Brand: Byrd Tool
  • Product Code: MYWOCU-00540
  • (USD) $453.00

  • Price in Canadian Dollar: (CAD) $615.50



This SHELIX head comes fully equipped with all necessary knives (actual number of knives being used on this head upon request). Additional replacement knives can be ordered along.

If you experience any difficulties with the use of this website or feel uncomfortable ordering online, please call us toll-free at 1-855-699-6635 to place your order over the phone!

Please note: The Powermatic P60 is on the market with 6 different cutter heads. Before you can order your SHELIX Head, you must verify what version has been used in your machine. To do this, you will need to remove the fence and the belt cover from the machine to expose the pulley mounted on the shaft of the cutter head. Measure the diameter of the shaft inside the pulley. It is either 5/8" or 3/4". If it is 3/4”, you must further verify the cutting diameter (head diameter including knives which is either 2-3/4” or 3”, and finally, the bearings being used. The 3/4” shaft versions most commonly come with 2 different sized bearings (1 x 6204 and 1 x R12). Some less frequently found versions also may use 2 identical bearings R12:
Shaft diameter: 5/8", Overall length of head (including shafts): 10.880" - Use version A
Shaft diameter: 3/4", Overall length of head (including shafts): 11.500", Cutting Diameter: 2-3/4” and 2 different bearings - Use version B

Shaft diameter: 3/4", Overall length of head (including shafts): 11.500", Cutting Diameter: 2-3/4” and 2 identical bearings - Use version C
Shaft diameter: 3/4", Overall length of head (including shafts): 11.500", Cutting Diameter: 3” and 2 different bearings - Use version D

Shaft diameter: 3/4", Overall length of head (including shafts): 11.500", Cutting Diameter: 3” and 2 identical bearings - Use version E
Shaft diameter: 5/8", Overall length of head (including shafts): 11.345", Cutting Diameter: 3.112” and 2 identical bearings - Use version F

If you are unsure and/or wish to verify all differences mentioned above, please click the button above that reads "Ask a question about this product". We will gladly e-mail you the drawings of these two cutter heads.

How much for shipping? - Please click the button above that reads "Customize and Order". Select any optional items and then click "Add to Cart". A window will pop up that shows the content of your shopping cart. In that window, please scroll down until you find on the bottom a link that reads "Calculate Shipping Costs" Select your country and state (or province) and click "Get Quotes" to see the shipping cost options for your purchase prior to check-out.

Any questions?  - Please refer to our section "FAQ" where most common questions are being answered. If you have any further questions or concerns, please click the button above that reads "Ask a question about this product" to contact us.

Write a review

Note: HTML is not translated!
    Bad           Good

Tags: SHELIX for POWERMATIC 8 inch Jointer, P60, P 60, P-60