Coned Bore: 2 1/8"

Coned Bore: 2 1/8

The ORIGINAL SHEar & heLIX and spiral cutter non-grind design.

  • SPIRALLED STAGGER TOOTH to break up chips for dust collection systems and to reduce horsepower requirements
  • SHEAR to give clean cutting action
  • HELIX to assist the chip flow

The ideal tool for tamplate based cutting on a shaper! (Matching ball bearings available upon request!



SHELIX Head for Shapers and Moulders, Bore: 2 1/8" (CONED BORE), Length: 2'', Diameter: 6''

SHELIX Head for Shapers and Moulders, Bore: 2 1/8" (CONED BORE), Length: 2'', Diameter: 6''

This SHELIX head can be used on Shapers and Moulders with a spindle diameter of 2 1/8" (CONED BORE)...

(USD) $478.00

SHELIX Head for Shapers and Moulders, Bore: 2 1/8" (CONED BORE), Length: 4'', Diameter: 6''

SHELIX Head for Shapers and Moulders, Bore: 2 1/8" (CONED BORE), Length: 4'', Diameter: 6''

This SHELIX head can be used on Shapers and Moulders with a spindle diameter of 2 1/8" (CONED BORE)...

(USD) $695.00

SHELIX Head for Shapers and Moulders, Bore: 2 1/8" (CONED BORE), Length: 6'', Diameter: 6''

SHELIX Head for Shapers and Moulders, Bore: 2 1/8" (CONED BORE), Length: 6'', Diameter: 6''

This SHELIX head can be used on Shapers and Moulders with a spindle diameter of 2 1/8" (CONED BORE)...

(USD) $912.00

SHELIX Head for Shapers and Moulders, Bore: 2 1/8" (CONED BORE), Length: 8'', Diameter: 6''

SHELIX Head for Shapers and Moulders, Bore: 2 1/8" (CONED BORE), Length: 8'', Diameter: 6''

This SHELIX head can be used on Shapers and Moulders with a spindle diameter of 2 1/8" (CONED BORE)...

(USD) $1,134.00

SHELIX Head for Shapers and Moulders, Bore: 2 1/8" (CONED BORE), Length: 10'', Diameter: 6''

SHELIX Head for Shapers and Moulders, Bore: 2 1/8" (CONED BORE), Length: 10'', Diameter: 6''

This SHELIX head can be used on Shapers and Moulders with a spindle diameter of 2 1/8" (CONED BORE)...

(USD) $1,339.00

Showing 1 to 5 of 5 (1 Pages)