Straight Bore: 40mm
The ORIGINAL SHEar & heLIX and spiral cutter non-grind design.
- SPIRALLED STAGGER TOOTH to break up chips for dust collection systems and to reduce horsepower requirements
- SHEAR to give clean cutting action
- HELIX to assist the chip flow
The ideal tool for tamplate based cutting on a shaper! (Matching ball bearings available upon request!
SHELIX Head for Shapers and Moulders, Bore: 40mm, Length: 60mm, Diameter: 122mm
This SHELIX head can be used on Shapers and Moulders with a spindle diameter of 40mm. You can use it..
(USD) $237.00
SHELIX Head for Shapers and Moulders, Bore: 40mm, Length: 100mm, Diameter: 122mm
This SHELIX head can be used on Shapers and Moulders with a spindle diameter of 40mm. You can use it..
(USD) $342.00
SHELIX Head for Shapers and Moulders, Bore: 40mm, Length: 130mm, Diameter: 122mm
This SHELIX head can be used on Shapers and Moulders with a spindle diameter of 40mm. You can use it..
(USD) $415.00
SHELIX Head for Shapers and Moulders, Bore: 40mm, Length: 150mm, Diameter: 122mm
This SHELIX head can be used on Shapers and Moulders with a spindle diameter of 40mm. You can use it..
(USD) $468.00
SHELIX Head for Shapers and Moulders, Bore: 40mm, Length: 180mm, Diameter: 122mm
This SHELIX head can be used on Shapers and Moulders with a spindle diameter of 40mm. You can use it..
(USD) $552.00
SHELIX Head for Shapers and Moulders, Bore: 40mm, Length: 230mm, Diameter: 122mm
This SHELIX head can be used on Shapers and Moulders with a spindle diameter of 40mm. You can use it..
(USD) $688.00