Straight Bore: 1 1/4"

The ORIGINAL SHEar & heLIX and spiral cutter non-grind design.
- SPIRALLED STAGGER TOOTH to break up chips for dust collection systems and to reduce horsepower requirements
- SHEAR to give clean cutting action
- HELIX to assist the chip flow
The ideal tool for tamplate based cutting on a shaper! (Matching ball bearings available upon request!
SHELIX f. Shapers & Moulders, Bore: 1 1/4'', Width: 1'', Diameter: 3''
This SHELIX head can be used on Shapers and Moulders with a matching spindle diameter. You can use i..
(USD) $121.00
SHELIX f. Shapers & Moulders, Bore: 1 1/4'', Width: 1'', Diameter: 3 1/2''
This SHELIX head can be used on Shapers and Moulders with a matching spindle diameter. You can use i..
(USD) $121.00
SHELIX f. Shapers & Moulders, Bore: 1 1/4'', Width: 2'', Diameter: 3''
This SHELIX head can be used on Shapers and Moulders with a matching spindle diameter. You can use i..
(USD) $153.00
SHELIX f. Shapers & Moulders, Bore: 1 1/4'', Width: 2'', Diameter: 4''
This SHELIX head can be used on Shapers and Moulders with a matching spindle diameter. You can use i..
(USD) $153.00
SHELIX f. Shapers & Moulders, Bore: 1 1/4'', Width: 2'', Diameter: 4 3/8''
This SHELIX head can be used on Shapers and Moulders with a matching spindle diameter. You can use i..
(USD) $153.00
SHELIX f. Shapers & Moulders, Bore: 1 1/4'', Width: 3'', Diameter: 3''
This SHELIX head can be used on Shapers and Moulders with a matching spindle diameter. You can use i..
(USD) $216.00
SHELIX f. Shapers & Moulders, Bore: 1 1/4'', Width: 3'', Diameter: 4''
This SHELIX head can be used on Shapers and Moulders with a matching spindle diameter. You can use i..
(USD) $260.00
SHELIX f. Shapers & Moulders, Bore: 1 1/4'', Width: 4'', Diameter: 3''
This SHELIX head can be used on Shapers and Moulders with a matching spindle diameter. You can use i..
(USD) $279.00
SHELIX f. Shapers & Moulders, Bore: 1 1/4'', Width: 4'', Diameter: 4''
This SHELIX head can be used on Shapers and Moulders with a matching spindle diameter. You can use i..
(USD) $279.00
SHELIX f. Shapers & Moulders, Bore: 1 1/4'', Width: 4'', Diameter: 4 3/8''
This SHELIX head can be used on Shapers and Moulders with a matching spindle diameter. You can use i..
(USD) $279.00
SHELIX f. Shapers & Moulders, Bore: 1 1/4'', Width: 6'', Diameter: 4''
This SHELIX head can be used on Shapers and Moulders with a matching spindle diameter. You can use i..
(USD) $426.00
SHELIX f. Shapers & Moulders, Bore: 1 1/4'', Width: 6'', Diameter: 4 3/8''
This SHELIX head can be used on Shapers and Moulders with a matching spindle diameter. You can use i..
(USD) $426.00