Hydraulic Bore: 1 13/16"

The ORIGINAL SHEar & heLIX and spiral cutter non-grind design.
- SPIRALLED STAGGER TOOTH to break up chips for dust collection systems and to reduce horsepower requirements
- SHEAR to give clean cutting action
- HELIX to assist the chip flow
The ideal tool for tamplate based cutting on a shaper! (Matching ball bearings available upon request!
SHELIX Head for Shapers and Moulders, Bore: 1 13/16" (HYDRAULIC BORE), Length: 2'', Diameter: 6''
This SHELIX head can be used on Shapers and Moulders with a spindle diameter of 1 13/16" (HYDRAULIC ..
(USD) $609.00
SHELIX Head for Shapers and Moulders, Bore: 1 13/16" (HYDRAULIC BORE), Length: 4'', Diameter: 6''
This SHELIX head can be used on Shapers and Moulders with a spindle diameter of 1 13/16" (HYDRAULIC ..
(USD) $842.00
SHELIX Head for Shapers and Moulders, Bore: 1 13/16" (HYDRAULIC BORE), Length: 6'', Diameter: 6''
This SHELIX head can be used on Shapers and Moulders with a spindle diameter of 1 13/16" (HYDRAULIC ..
(USD) $1,081.00
SHELIX Head for Shapers and Moulders, Bore: 1 13/16" (HYDRAULIC BORE), Length: 8'', Diameter: 6''
This SHELIX head can be used on Shapers and Moulders with a spindle diameter of 1 13/16" (HYDRAULIC ..
(USD) $1,311.00
SHELIX Head for Shapers and Moulders, Bore: 1 13/16" (HYDRAULIC BORE), Length: 10'', Diameter: 6''
This SHELIX head can be used on Shapers and Moulders with a spindle diameter of 1 13/16" (HYDRAULIC ..
(USD) $1,539.00