Hydraulic Bore: 2 1/8"
The ORIGINAL SHEar & heLIX and spiral cutter non-grind design.
- SPIRALLED STAGGER TOOTH to break up chips for dust collection systems and to reduce horsepower requirements
- SHEAR to give clean cutting action
- HELIX to assist the chip flow
The ideal tool for tamplate based cutting on a shaper! (Matching ball bearings available upon request!
SHELIX for Shapers, Bore: 2-1/8"HYDRAULIC BORE, Width: 2'', Diameter: 6''
This SHELIX head can be used on Shapers and Moulders with a matching spindle diameter. You can use i..
(USD) $647.00
SHELIX for Shapers, Bore: 2-1/8"HYDRAULIC BORE, Width: 4'', Diameter: 6''
This SHELIX head can be used on Shapers and Moulders with a matching spindle diameter. You can use i..
(USD) $892.00
SHELIX for Shapers, Bore: 2-1/8"HYDRAULIC BORE, Width: 6'', Diameter: 6''
This SHELIX head can be used on Shapers and Moulders with a matching spindle diameter. You can use i..
(USD) $1,080.00
SHELIX for Shapers, Bore: 2-1/8"HYDRAULIC BORE, Width: 8'', Diameter: 6''
This SHELIX head can be used on Shapers and Moulders with a matching spindle diameter. You can use i..
(USD) $1,310.00
SHELIX for Shapers, Bore: 2-1/8"HYDRAULIC BORE, Width: 10'', Diameter: 6''
This SHELIX head can be used on Shapers and Moulders with a matching spindle diameter. You can use i..
(USD) $1,539.00