Straight Bore: 1 1/2"

Straight Bore: 1 1/2

The ORIGINAL SHEar & heLIX and spiral cutter non-grind design.

  • SPIRALLED STAGGER TOOTH to break up chips for dust collection systems and to reduce horsepower requirements
  • SHEAR to give clean cutting action
  • HELIX to assist the chip flow

The ideal tool for tamplate based cutting on a shaper! (Matching ball bearings available upon request!



SHELIX Head for Shapers and Moulders, Bore: 1 1/2", Length: 2'', Diameter: 4 13/16''

SHELIX Head for Shapers and Moulders, Bore: 1 1/2", Length: 2'', Diameter: 4 13/16''

This SHELIX head can be used on Shapers and Moulders with a spindle diameter of 1 1/2". You can use ..

(USD) $205.00

SHELIX Head for Shapers and Moulders, Bore: 1 1/2", Length: 4'', Diameter: 4 13/16''

SHELIX Head for Shapers and Moulders, Bore: 1 1/2", Length: 4'', Diameter: 4 13/16''

This SHELIX head can be used on Shapers and Moulders with a spindle diameter of 1 1/2". You can use ..

(USD) $342.00

SHELIX Head for Shapers and Moulders, Bore: 1 1/2", Length: 5'', Diameter: 4 13/16''

SHELIX Head for Shapers and Moulders, Bore: 1 1/2", Length: 5'', Diameter: 4 13/16''

This SHELIX head can be used on Shapers and Moulders with a spindle diameter of 1 1/2". You can use ..

(USD) $415.00

SHELIX Head for Shapers and Moulders, Bore: 1 1/2", Length: 7'', Diameter: 4 13/16''

SHELIX Head for Shapers and Moulders, Bore: 1 1/2", Length: 7'', Diameter: 4 13/16''

This SHELIX head can be used on Shapers and Moulders with a spindle diameter of 1 1/2". You can use ..

(USD) $552.00

SHELIX Head for Shapers and Moulders, Bore: 1 1/2", Length: 9'', Diameter: 4 13/16''

SHELIX Head for Shapers and Moulders, Bore: 1 1/2", Length: 9'', Diameter: 4 13/16''

This SHELIX head can be used on Shapers and Moulders with a spindle diameter of 1 1/2". You can use ..

(USD) $688.00

Showing 1 to 5 of 5 (1 Pages)