SHELIX Heads for Shapers and Moulders

SHELIX Heads for Shapers and Moulders

The ORIGINAL SHEar & heLIX and spiral cutter non-grind design.

  • SPIRALLED STAGGER TOOTH to break up chips for dust collection systems and to reduce horsepower requirements
  • SHEAR to give clean cutting action
  • HELIX to assist the chip flow

​Please select the type of SHELIX Head that you need based on the bore in the head (or the spindle you intend to use it on):


Refine Search


SHELIX Head for Shapers and Moulders, Bore: 1 1/4", Length: 4'', Diameter: 4 3/8''

SHELIX Head for Shapers and Moulders, Bore: 1 1/4", Length: 4'', Diameter: 4 3/8''

This SHELIX head can be used on Shapers and Moulders with a spindle diameter of 1 1/4". You can use ..

(USD) $280.00

SHELIX Head for Shapers and Moulders, Bore: 1 1/4", Length: 6'', Diameter: 4 3/8''

SHELIX Head for Shapers and Moulders, Bore: 1 1/4", Length: 6'', Diameter: 4 3/8''

This SHELIX head can be used on Shapers and Moulders with a spindle diameter of 1 1/4". You can use ..

(USD) $427.00

Showing 51 to 52 of 52 (2 Pages)